20-Sep-2020 Home | Contact Us | Certifications  

Pharmaceutical Packaging Glass >
Essco Sterile Vials Sterile Vials with Tamper Indicating Seal
These empty Injection Vials are sterile and nonpyrogenic. These vials are made with USP Type I glass both in Tubular and Molded form ranging from 2ml to 100ml.

Intended for mixing different medications or solutions for injection. Centre-tear seal provides easy needle insertion while helping to ensure the integrity of vials through tamper indication.

Injection Vials, Type 1, Molded
These Injection or Serum vials are available in USP/EP Type I clear glass. Suitable to contain preparations for parental and other sensitive injectable products. The containers may be sterilized before and after filling and provide mechanical resistance to rapid changes in temperature, better than other types of glasses. Available in size 5ml, 8ml, 10ml, 15ml, 20ml, 30ml, 50ml, 100ml. These vials are packed in corrugated plastic trays and shrink-wrapped to reduce contamination by particulates.
Essco Injection Vials

Essco Infusion Vials Infusion Vials, Type 1, Molded
This autoclavable molded 100ml vial is graduated and has a 32mm wide mouth Crimp Top. These vials are packed in corrugated boxes and then shrink-wrapped. Matching rubber stoppers and aluminum seals also available.

Injection Vials, Type 1, Tubular
These tubular USP/EP TYPE I injection vials are available in both clear and amber glass. Due to their closely held tolerances and uniform wall thickness, these vials are ideal for Lyophilization and storage of other liquid pharmaceutical products. Available in type 2R, 4R, 6R, 8R, 10R, 15R, 20R, 25R, 30R as per DIN/ISO 8362 standards. These vials are packed in corrugated plastic trays and shrink-wrapped to reduce contamination by particulates.
Essco Injection Vials

Essco Injection Vials Injection Vials, TYPE III, Molded
These Injection or Serum vials are available in both clear and amber USP/EP Type I and III glass. Features heavy wall weight and uniformly distributed glass walls. High tolrance to thermal shocks and low extractbles. These vials are used in clinical and research labs, industrial and consumer markets for storage of reagents, chemicals and packaging of certain pharmaceutical products. Available in size 5ml, 8ml, 10ml, 15ml, 20ml, 30ml, 50ml, 100ml. These vials are packed in corrugated plastic trays and shrink-wrapped to reduce contamination by particulates.

Syrup, Tablet and Powder Bottles, TYPE III, Molded
These round screw-neck bottles are moulded from amber Neutral Type III glass. Comes with different cap options like temper proof caps, contineuous thread caps, child resistant caps in polypropylene and aluminum. Available in size 10ml, 15ml, 20ml, 30ml, 45ml, 60ml and 100ml with different neck sizes. Ideally used for syrups, powder and tablets packaging.
Essco Infusion Vials

Glass Ampoules (Ampules)
Converted mainly from Schott Glass, these FBCN (Flat Based and Constricted Neck) ampoules are made in Flame Cut (Form B), Funnel Top (Form C), Close Top Rota/Marzocchi (Form D) types with snap-off ring, One-point cut (OPC), different colour identification bands and Cremeic printing. We can also make double tip and fine tip ampoules as per custom specifications
Essco Injection Vials

Essco Infusion Vials IV Bottles, TYPE III, Molded
These autoclavable Type III Molded bottles are available in 100ml, 250ml, 375ml, 500ml capacitites with 32mm Crimp Top. These vials are packed in corrugated boxes and then shrink-wrapped. Matching rubber stoppers and aluminum seals also available.

Copyright © ESSCO GLASS