HOME | AMPOULES | VIALS | BOTTLES | TUBES | CAPS & SEALS | GLASSWARE | PLASTICWARE | ENQUIRY

Our range of glassware can be used for many functions in the laboratory and is comparable to any international brand. Please contact us if you can't find what you are looking for as the list below doesn't cover our full range.

essco glass molded vials crimp neck Beakers, Low and High Form, Graduated
These heavy wall glass beakers are made of borosilicate glass equivalent to Pyrex/Corning in quality and durability. Available in all standard sizes ranging from 5ml to 5000ml both in High and Low form. Graduated with pouring spout.
essco glass molded vials crimp neck Bottle, Dreschel (aka Gas Trap Bottle or wash Bottle))
Borosilicate glass, inlet and outlet tubes in a interchangeable stopper. Bottle available in all ground glass joint sizes. Capacity 125ml, 250ml, 500ml
essco glass molded vials crimp neck Bottle, Reagent)
Borosilicate glass reagent bottle with interchangeable hexagonal flat head hollow stopper. Bottle available both narrow and wie mouth/neck. Capacity ranges from 30ml to 1000ml.
essco glass molded vials crimp neck Condenser, Allihn
Allihn condenser with 10mm hose connections available in all joint sizes and effective length of 200mm, 300mm, 400mm, 500mm.
essco glass molded vials crimp neck Condenser, Cold Finger (aka Immersion Condenser)
Cold Finger condenser with 10mm hose connections available in all joint sizes and effective length of 125mm and 200mm.
essco glass molded vials crimp neck Condenser, Graham (aka Inland Revenue)
Graham condenser with 10mm hose connections available in all joint sizes and effective length of 200mm, 300mm, 400mm, 500mm.
essco glass molded vials crimp neck Condenser, Liebig
Liebig condenser with 10mm hose connections available in all joint sizes and effective length of 200mm, 300mm, 400mm, 500mm.
essco glass molded vials crimp neck Condenser, Reflux Coiled
Reflux coil condenser with large cooling capacity and 10mm hose connections available in all joint sizes and effective length of 200mm, 300mm, 400mm, 500mm.
essco glass molded vials crimp neck Condenser, Vigreux
Vigreux condenser is a modification of the air condenser. It is usually used as a fractionating column for fractional distillations. Unlike straight-walled columns, a Vigreux column has a series of downward-pointing indentations on the inside wall which serve to dramatically increase the surface area without increasing the length of the condenser. Available in all joint sizes and effective length of 200mm, 300mm, 400mm, 500mm.
essco glass molded vials crimp neck Condenser, West
West condenser is variant of the Liebig condenser having a more slender design. The narrower inner jacket may render more efficient cooling with respect to more coolant consumption. Available in all joint sizes and effective length of 200mm, 300mm, 400mm, 500mm.
essco glass molded vials crimp neck Cylinders Measuring, Graduated
Graduated measuring cylinders made from heavy Borosilicate glass. Sturdy, strong plastic base with bumper guard to prevent breakage. Supplied in all sizes ranging from 5ml to 1000ml.
essco glass molded vials crimp neck Extractors-Soxhlet Set
Soxhlet extractor 2pc set available in all joint size and extractor capacities.
essco glass molded vials crimp neck Flask, Evaporating
Heavy and uniform wall thickness design. The unique flask shape is excellent for the controlled evaporation of foaming solvents such us toluene or xylene on a rotary evaporator. Available in all joint sizes and capacities ranging from 100ml to 1000ml.
essco glass molded vials crimp neck Flask, Filtering
Made from high quality heat resistant Borosilicate glass. The Vacuum Filtering Flask has a much heavier wall and rim than a standard Erlenmeyer flask making it extremely strong and durable. Available in all capacities ranging from 100ml to 1000ml.
essco glass molded vials crimp neck Flask, Single Neck, Flat Bottom
Flat bottom flask. Hand blown with heavy and uniform wall thickness. Available in all joint sizes and capacities ranging 100ml to 10,000ml.
essco glass molded vials crimp neck Flask, Two Neck, Round Bottom
Round bottom flask with two necks. Hand blown with heavy and uniform wall thickness. Available in all joint sizes and capacities ranging 100ml to 10,000ml.
essco glass molded vials crimp neck Flask, Three Neck, Round Bottom
Round bottom flask with three necks. Hand blown with heavy and uniform wall thickness. Available in all joint sizes and capacities ranging 100ml to 10,000ml.
essco glass molded vials crimp neck Flask, Four Neck, Round Bottom
Round bottom flask with four necks. Hand blown with heavy and uniform wall thickness. Available in all joint sizes and capacities ranging 100ml to 10,000ml.
essco glass molded vials crimp neck Funnel, Analytical
75 mm ( 3" ) diameter funnel with 150 mm ( 6" ) stem. Overall height is approx 225mm ( 9" ). Fabricated from heavy heat resistant Borosilicate glass. Uniform wall thickness. Avaiable in 100mm, 125mm and 150mm diameter also.
essco glass molded vials crimp neck Funnel, Buchner
Buchner funnel filter with sealed in 60 mm glass disc of medium Coarse. The capacity is 150ml. Avaiable in 200ml, 250ml and 500ml capacity also.
essco glass molded vials crimp neck Funnel, Powder
Powder funnel with 60° offset for use with multi-neck flasks. Avaiable in 100ml, 250ml and 500ml capacity.
essco glass molded vials crimp neck Funnel, Separatory
Pear shape separatory funnel with PTFE stopcock. Avaiable in all joint sizes and capacities 50ml to 5000ml capacity. Dropping funnels in tubular shape with graduation marking also available.
essco glass molded vials crimp neck Funnel, Pressure Equalizing
Pressure equalizing funnel with PTFE stopcock. Both joints are 24/29 and funnel capacity is 1000ml. Avaiable in all joint sizes and capacities ranging from 100ml to 1000ml.
Petri Dish with Cover Petri Dish with Cover
Standard Petri Dish for growing cultures or similar lab work. Heavy glass dish holds approximately 50 ml in volume. It measures 3.5" (90 mm) in diameter, and 5/8" (16 mm) high. Complete with matching glass cover. Supplied in set of 10.
essco glass molded vials crimp neck Pipettes Measuring, Mohr's Type
Reusable Mohr's measuring pipettes are fabricated from high quality borosilicate glass and have permanent scale. Avaiable in capacities range of 0.1ml to 25ml.
essco glass molded vials crimp neck Organic Chemistry Kit, 13 pcs
Available in all joint sizes, this kit comprises: (1) 1000ml Round bottom Flask - 1 pc, (2) 200mm Graham Condenser - 1 pc, (3) Distillation Adapter with Parallel Joints 24/29 - 1 pc, (4) Vertical Vacuum Receiver 24/29 - 1 pc, (5) Full length 0°C to 300°C Thermometer - 1 pc, (6) 24/29 plastic Keck Clamps - 6 pc, (7) Threaded Thermometer Adapter (with nylon bush) - 1 pc, (8) Glass Stopper - 1 pc,
Staining Trough Staining Trough
Moulded glass trough with moulded glass cover. Dimensions side 117mm and height 65mm.
Staining Jar Staining Jar
Moulded glass jar with moulded glass cover. Takes 10 slides of 76mm x 26mm back to back.
essco glass molded vials crimp neck Volumetric Pipettes
Pipettes are manufactured from specially selected heavy-wall machine-drawn borosilicate accurate bore glass tubing. They have precision formed jets and bevel ground ends to resist chipping. The graduation marks are in durable white enamel or amber stain. Both are resistant to normal laboratory agents and repeated washing. All pipettes are individually measured then marked. Avaiable in 1ml, 2ml, 5ml, 10ml, 15ml, 20ml, 25ml, 50ml, 100ml capacities.
essco glass molded vials crimp neck Watch Glass
Watch glass has multiple uses in a laboratory. It may be applied as a jar cover in condensation experiments, a protective lid to prevent contamination by dust particles or as an evaporation surface when crystallization or precipitation are being observed. These watch glasses are made of high quality Flint glass. Availabe in sizes 25mm, 50mm, 75mm and 150mm.
COMPANY | ENQUIRY | TECHNICAL | COPYRIGHT © ESSCO | W3C